Safety Instructions

Display
15
Display
Width-height ratio
Selections to make image match screen:
• Auto:
Adjust the image size proportionally, in order to make the horizontal width or vertical width
match the Product’s natural resolution. It is wished to fully utilize the screen without adjusting
the width-height ratio of source image.
•4:3:
Adjust
the image proportionally, in order to display the image at the middle of screen with the
width-height ratio of 4:3; which means, do not change the proportion during display.
•16:9:
Adjust the image proportionally, in order to display the image at the middle of screen with the
width-height ratio of 16:9; which means, do not change the proportion during display.
•16:10:
Adjust the image proportionally, in order to display the image at the middle of screen with the
width-height ratio of 16:10; which means, do not change the proportion during display.
•Inherent:
Have imaging based on the original image; which means, do not change the proportion during
display.
Keystone correction
Manually correct the warp image due to projection angle.
Press ▲ to correct the keystone at the top of image.
Press ▼ to correct the keystone at the bottom of image.
Press ► to correct the keystone at the right side of image.
Press ◄ to correct the keystone at the left side of image.
•Left and right keystone correction applies to Type FHD only.