Safety Instructions

Pictures
13
Pictures
Color mode
The different pictures have corresponding preset values.
• Standard: Maximize the brightness of projection image. This mode applies to the environment
that requires super brightness.
• Computer: Maximize the purity of RGB color, in order to provide the real pictures.
• Demonstration: Applies to demonstration in sunlight environment, in order to match the colors
of PC and laptop.
• Picture: Applies to picture browsing.
• Film: Applies to playing of color films and the films of digital camera in the dim (slight light)
environment.
Brightness
Increase or decrease of picture brightness between 0 and 100.
Contrast
Set the difference between the bright color area and dark color area between -50 and 50.
Color temperature
Set the color temperature: Normal, cold and warm color.
• Warm color: Make the picture white and yellowish.
• Normal: Keep normal white tone.
• Cold color: Reach the highest color temperature; based on cold color, the image can display
more blue and white tones compared with other settings.
Press ▲/▼ to select the required items and then press ◄/► to adjust the settings.
Color
Press ▲/▼ to select the required items. The color saturation will decrease along with the decrease
of value. If the value is too high, the image color will be too strong to be real.
Tone
Press ◄/► to select the required items. The image is closer to red if the value is high, or closer to
green is the value is low.