Safety Instructions

Operation of Remote Controller
11
Operation of Remote Controller
Point the remote controller at the sensor of infrared remote control and press the button.
An IR remote controller sensor is arranged in front of the Product. Hold the remote controller and
keep a right angle within 30° between the remote controller and sensor, in order to acquire the
normal functions of remote controller. Do not put any obstacle in front of the IR remote control
sensor of the Product, to avoid blockage of infrared beam.
Reach distance of benchmark offset angle (left and right) of remote controller (remote controller is
fixed)
Reach distance of benchmark offset angle (up and down) of remote controller (remote controller is
fixed)
Note
•The remote controller may have failure when remote control sensor is illuminated by strong
light sources such as sunlight or fluorescent light.
•Please operate the remote controller at a distance that the remote control sensor can be
seen.
•Do not shake or drop the remote controller.
•Keep the remote controller at the cool and dry places.
•Do not splash water on the remote controller nor put wet objectives on it.
•Do not dismantle the remote controller.
5.6m or above 20μ W/cm
2
5.6m or above 20μ W/cm
2
Remote controller
Remote control
section
Light receiving
surface
Horizontal
direction
Ground
5.6m or above 20μ W/cm
2
5.6m or above 20μ W/cm
2
Remote controller
Remote control
section
Light receiving
surface
Light receiving
section
Vertical direction
Ground