Safety Instructions

Battery Installation
10
Battery Installation
1. Open the battery cover according to the
direction in diagram.
2. Install the battery in the chamber according
to the diagram.
3. Close the battery cover.
Caution
•Explosion may occur if the replaced batteries have wrong type.
•Please handle the waste batteries according to the instructions.
•Make sure positive and negative poles are correct when installing the batteries.
Note
Keep the batteries inaccessible to children.
Take out the batteries of remote controller when it is long idled.
Do not recharge the batteries nor throw them into the fire or water.
Do not handle the waste batteries along with the household wastes; instead, handle the waste
batteries according to local regulations.
Keep the batteries in cool, dry and lightproof places and keep them free from fire and water.
For any liquid leakage of battery, wipe off the leaked liquid and then replace the batteries with
new batteries. If the leaked liquid is attached on your body or clothes, wipe off them immediately
with water.