User's Manual

7
5-11 Timer/User: Stand Tmr
The elapsed timer (located on the bottom right on the display) allows you to see how long you have been
on a stand. The timer starts as soon as you turn on the Patriot transmitter. You can reset the timer by
accessing the main menu, selecting timer option, and then selecting the “Stand Timer Reset.” The timer will
automatically reset to 00:00 if it is allowed to continue beyond 99:59.
5-12 Timer: Alarm
The Patriot remote features a visual alarm that can be set to go off after a span of time. The available times
are represented in minutes: 1 15 (individual steps) and 20-60 (steps of 5). When the alarm is set and the
configured time span passes, the stand timer (or clock if set to display the clock) will display a confirmation
message and the timer indicator will begin to flash. To set an alarm, select the “Alarm (minutes)” menu
item, push the “Select” button, and then use the “Sound Up” or “Sound Down” buttons to find the desired
time value. When the desired time value is selected, push the “Select” button to activate the alarm.
5-13 Remote Settings: Download List
Any time you reprogram the Patriot to add new sounds or rearrange existing sounds, you must download a
new copy of the play list to the transmitter. This menu item will guide you through that process. In order to
download the playlist, you will need a 3.5mm stereo male-to-male cable. See section 6-3 for more
information.
5-14 Remote Settings: AUX Cntrl
The auxiliary jack
operation
specifications can
be changed from
either momentary
or latched. All
FOXPRO decoys require that the jack be setup for momentary. To configure the auxiliary jack setting,
highlight the “Aux Control” menu item, push the “Select” button, and then use “Sound Up” or “Sound
Down” to toggle the two options. When the appropriate setting is selected, push the “Select” button to lock
it in.
5-15 Remote Settings: Snd Nums
The TX433 displays your sound list in a logical format based upon the index value of each sound file. The
sounds are numbered from 000 199. You can choose to either have the index values visible in your sound
list or you can hide them. The advantage of hiding the numbers is that the sound names might be easier to
read. The options for this setting are “Show” and “Hide.” To toggle the options, highlight “Snd Nums” in the
menu, push the “Select” button, use the “Sound Up” or “Sound Down” button to cycle the options, then
push “Select” to lock it in.
5-16 Remote Settings: User 1 and User 2
User button 1 and 2 can be assigned a function of your choice for quick one-button access. You can choose
from: favorite 1, favorite 2, favorite 3, AUX, recall, timer reset, and backlight. To set this, highlight the “USER
1 or “USER 2” menu item, push the “Select” button, then use the “Sound Up” or “Sound Down” scroll
button to cycle through the options. When the desired option has been set, push “Select” a final time to
lock it in.
5-17 Remote Settings: About Info
The About Info screen displays a variety of information pertaining to version number, number of sounds
loaded, number of favorites, and transmitter health.
IMPORTANT NOTE
Some third party decoys may require latched operation as opposed to
momentary. A detailed list of other products and their specific requirements is
not maintained by FOXPRO. You will need to check with the equipment
manufacturer to determine if it is compatible and what the requirements are.