User's Manual

further clockwise you turn the knob, the louder the unit will play. At this
point, the LCD display on the FURY will first display the software
revision and then display two flashing horizontal bars “- -“.
3) Press the up or down arrow keypad button on the FURY to select a
sound number. Once selected, release the button, and the sound will
play. To select a different sound, simply press the up or down arrow
buttons again to your desired sound.
1.4 OPERATING THE FURY BY TX-500 REMOTE CONTROL
1) Turn on the TX-500 transmitter by pressing down and holding the
sound selector knob for about 2-3 seconds. The graphic LCD display
will illuminate displaying “FOXPRO the Caller of the Wild”. At this point,
let go of the button. In a moment, the screen will switch to normal view
and display the first six sounds.
2) Select the sound you wish to play by turning the rotary selector knob
on the top of the transmitter either clockwise, which will scroll up, or
counter-clockwise which scrolls down.
3) When the sound desired appears in the displayed list, highlight the
sound, and press down on the rotary selector knob. You will notice
that the number associated with that sound will appear in the bottom
text line. This text line also displays the current channel setting (which
should be 10 from the factory), a mute indicator, volume level indicator,
battery monitor, and timer. The top text line displays the front speaker,
rear speaker, and auto volume and mode indicators. For more
information on the text lines, see the TX-500 features section of this
instruction manual.
4) Now that you have selected the sound to be played, simply bring the
volume up to your desired level by depressing the volume up arrow.
As you depress the volume up arrow, note that the volume setting
number in the bottom text increases.
Muting the Sound
To mute the sound, simply press the mute button. The letter “M” will appear in
the bottom text line. The mute also serves as a pause feature, meaning that
when you un-mute the sound again, it will start playing where you muted the
sound instead of starting over again.
Changing the Sound
To change the sound, simply highlight your next sound preference and depress
the rotary selector knob. Your sound will instantly change.