User's Manual

menus.
AUX
This option allows you to specify whether the AUX function will be
momentary or latched. To change the AUX settings, use the selector to
highlight the desired option then press down on the selector knob one time.
NOTE: FOXPRO’s Jack-in-the-Box Decoy requires that the AUX
function be setup for momentary. Please check the specifications on
the device you are trying to operate prior to connecting it to your
Fury.
DISPLAY
The display menu has many submenus that will customize the TX-500.
Each one will be discussed. To enter the submenu, simply highlight the
desired one and press down on the selector knob one time.
Text
There are two options for text; NORMAL and LARGE NUMBERS ONLY.
The vast majority of users will leave this setting on NORMAL, but for those
who have trouble reading the information on the screen, you are invited to
use the LARGE setting. To change the text settings, use the selector to
highlight the desired option then press down on the selector knob one time.
Graphics
The graphics menu allows you to control whether the screen NORMAL or
REVERSE IMAGE. Reversing the image may be beneficial for users who
are hunting at night to help reduce the glow from the screen. You can also
set the contrast. To change the graphics settings, use the selector to
highlight the desired option then press down on the selector knob one time.
To set the contrast, highlight the SET CONTRAST option and press down
on the selector knob. You will see a selector bar appear in the middle of the
screen. The middle position is the default position. To make adjustments,
rotate the selector knob clockwise or counterclockwise to set the bar.
Moving the bar to the left will decrease the contrast and to the right will
increase. Once you have a desired setting picked, press down on the
selector knob one time to lock it in.
Scroll
This menu allows you to adjust how the scrolling function will work. PAGED
will result in six sounds being displayed per page and six more sounds
being displayed upon incrementing to the next page. SINGLE will allow you
to increment up by one sound at a time rather than a page at a time.
NOTE: By default, the scroll option will be set to SINGLE.
Backlight