User's Manual

6.3 TURNING ON THE TX-500
To turn on your TX-500 transmitter, simply push and hold the selector knob
until the display activates, then release the selector knob. Be sure to turn off
the TX-500 transmitter after use so that unnecessary battery drain is prevented.
To do so, push and hold the selector knob until the selection menu appears
(with turn off transmitter already highlighted). By pressing the selection knob a
second time the transmitter will shut off. Should you forget to off the
transmitter when you are finished, it will automatically shut down after 2 hours
of non-use.
6.4 SELECTING SOUNDS
The TX-500 provides you with two methods of selecting and changing sounds
on your FOXPRO Fury. You can use the rotary selector knob to scroll through
and send sound selections or you can directly enter the sound number by using
the numeric keypad.
Rotary Selector Method:
The rotary selector knob is located on the top right of the TX-500. This is a
dual-function knob that provides you with clockwise/counterclockwise action to
scroll through the sound list as well as a push button function to send sound
changes to the unit (it also works to confirm or lock-in various menu changes
by pushing down it.)
With the TX-500 turned on, you will see six sounds displayed on the screen.
Clockwise rotation of the knob scrolls the highlight bar up the page, while
counter-clockwise rotation moves it down. Once the bar reaches the top of the
6 displayed sounds, the next movement of the knob in the same direction will
cause the sounds to increment or decrement. Once the sound you wish to play
is highlighted in the display, push down on the selector knob to have it
transmitted to the FURY for play.
You can scroll through pages of 6 sounds (up or down) very quickly by turning
the rotary sound selector knob or (if preferred) you can configure the
transmitter for single index mode. The rotary sound selector knob is used to
highlight sounds on the display, change the page being viewed, and to send
the selected sound to the FURY.
Counterclockwise rotation decrements the sound lists. Clockwise rotation
increments the sound lists. If you wish to start your current sound playing from
the beginning, simply depress the knob again.
To switch sounds, simply select and highlight your desired sound and depress