User's Manual

Page | 22
desired option then press down on the selector knob one time.
Graphics
The graphics menu allows you to control whether the screen NORMAL or
REVERSE IMAGE. Reversing the image may be beneficial for users who are
hunting at night to help reduce the glow from the screen. You can also set the
contrast. To change the graphics settings, use the selector to highlight the
desired option then press down on the selector knob one time.
To set the contrast, highlight the SET CONTRAST option and press down on
the selector knob. You will see a cursor appear in the middle of the screen. The
middle position is the default position. To make adjustments, rotate the selector
knob clockwise or counterclockwise to set the bar. Moving the cursor to the left
will decrease the contrast and to the right will increase. Once you have a
desired setting picked, press down on the selector knob one time to lock it in.
Scroll
This menu allows you to adjust how the scrolling function will work. PAGED will
result in six sounds being displayed per page and six more sounds being
displayed upon incrementing to the next page. SINGLE will allow you to
increment up by one sound at a time rather than a page at a time.
NOTE: By default, the scroll option will be set to SINGLE.
Backlight
There are four options in the backlight menu; ALWYS OFF, LOW, MEDIUM,
HIGH, and ALWAYS ON. To change the backlight settings, use the selector to
highlight the desired option then press down on the selector knob one time.
NOTE: You should experiment with the different settings to find out which
ones work the best in varying conditions.
CHANNEL
Make sure that the channel in the TX-500 is set to 15 for operation. To change
the channel, use the selector to highlight the desired option then press down on
the selector knob one time.
VOLUME STEPS
This menu allows you to customize the speed at which the TX-500 will ramp the
volume. The options are 2, 4, 5, 8, and 10. To change the volume step settings
use the selector to highlight the desired option then press down on the selector
knob one time.
NOTE: Experiment with the volume steps to find out which one works the
best for you. By default, the volume step will be set to 2.