User's Manual

Page | 21
channel), but you would prefer that each sound come out of the opposite
speaker, simply select reverse stereo mode. This can be changed during sound
playback.
NOTE: Make sure you have read and understand the FOXFADE section as
making changes here will directly affect how FOXFADE will work.
PLAY MODES
This menu allows you to specify which play mode the SNOW-CROW PRO 2
will operate on. To change the play mode, use the selector to highlight the
desired option then press down on the selector knob one time:
REPEAT MODE (plays sounds/sequences continuously)
SINGLE PLAY MODE (plays sounds/sequences once)
JUKEBOX MODE (plays sounds/sequences incrementally)
NOTE: By default, REPEAT will be set as the play mode.
AUTO-V ON & AUTO-V OFF
You can turn AUTO-V on or off by highlighting the desired one and press down
on the selector knob one time. See section on AUTO-V for more details.
6.2 TX500 CONFIG MENU
This menu allows to you setup how the TX-500 will operate. Everything from
contrast to how the AUX button performs will be configurable through these
menus.
AUX
This option allows you to specify whether the AUX function will be momentary
or latched. To change the AUX settings, use the selector to highlight the
desired option then press down on the selector knob one time.
NOTE: FOXPRO
®
’s Jack-in-the-Box Decoy requires that the AUX function
be setup for momentary. Please check the specifications on the device you
are trying to operate prior to connecting it to your SNOW-CROW PRO 2.
DISPLAY
The display menu has many submenus that will customize the TX-500. Each
one will be discussed. To enter the submenu, simply highlight the desired one
and press down on the selector knob one time.
Text
There are two options for text; NORMAL and LARGE NUMBERS ONLY. The
vast majority of users will leave this setting on NORMAL, but for those who
have trouble reading the information on the screen, you are invited to use the
LARGE setting. To change the text settings, use the selector to highlight the