User's Manual

Page | 19
4. Exit the menu
AUTO-V will begin its volume adjustment cycle as soon as you begin playing a
sound. You will also see the AV indicator on the top line of the TX-500 screen
show ON.
Turning AUTO-V Off
AUTO-V can be turned off at any point during operation. When AUTO-V is
disengaged, the SNOW-CROW PRO 2 will continue playing the current sound
at 65% of the maximum volume to help prevent an erratic volume level change.
1. Hold down the selector knob for 2-3 seconds to access the main menu.
2. Select SNOW-CROW PRO 2 CONTROL
3. Select AUTO-V OFF to disengage AUTO-V
4. Exit the menu
Setting the Maximum Volume Level
AUTO-V will climb to volume level 30 as a maximum across a three minute
period by default. You can change the maximum volume level for the climb by
using the volume up/down buttons on the transmitter once you have engaged
AUTO-V.
Note: Making changes to the volume level after AUTO-V has been
engaged for a while can result in erratic volume level changes. Get
familiar with how AUTO-V works before using it on a stand.
Note: If the SNOW-CROW PRO 2 is turned off, be sure to reselect AUTO-V
function prior to operation.
5.11 AUX
This button is used to operate an external device that is connected to the
SNOW-CROW PRO 2—typically the FOXPRO
®
Jack-in-the-Box Decoy.
Depressing the AUX button will begin operation of the external device. A
second press of the AUX button will cease operation. For more information on
the AUX function, see the AUX Jack Function in the beginning of the manual.
The AUX can be configured to be momentary or a latched output. This can be
useful if you are using external devices that must see a latched connection as
opposed to the momentary connection required to activate/deactivate
FOXPRO
®
’s Jack-in-the-Box Decoy.
Adjusting AUX Jack Operation
1. Access the main menu by pressing and holding the rotary selector knob
for about 2-3 seconds.
2. Highlight the TX500 CONFIG menu item and press the rotary selector