User's Manual

IMPORTANT NOTE: Your FURY will play .FXP, .24B .mp3 and
.wav files (stereo .wav files at 32 kHz sample rate). Other file types
are not supported. Although you may store .FXP sounds on your
computer for later use, they can not be played on your computer, or
on any audio player other than a FOXPRO caller.
8.4 DOWNLOADING NEW PLAYLIST TO TX-500
Program your sounds into the Fury as outlined in the instruction manual. Make
certain that you do not use the same number for more than one sound! Note
that the transmitter can only display 21 characters per line. The first 3
characters must be the sound number, from “000” through “199”. Place a space
between the sound number and the sound name. 17 characters remain for the
sound name. Although the sound name can have more characters, the TX-500
will only display the first 17 characters. Any additional ones will not be
displayed.
1) Disconnect all accessories from the Fury (i.e. charger, speakers, etc.)
2) Turn the power off on both the Fury and the TX-500.
3) Turn on the TX-500.
4) Access the Main Menu
5) Enter the TRANSMITTER CONFIG menu
6) Highlight the UPLOAD SOUND LIST menu item and press down on the
selector knob one time
7) Make sure the Fury is within 3 feet of the TX-500
8) Turn on the Fury
9) A progress bar on the TX-500 display will indicate the playlist is being
transferred
NOTE: This process may take a few minutes. DO NOT
turn off the TX-500 or Fury during this process.