User's Manual
speaker is chained to external speaker A and the rear speaker is
chained to external speaker B. By shutting off one of the speakers,
the external will also shut off.
Mono/Stereo
This menu allows you to specify the playback mode of the Fury. To change
the playback mode, use the selector to highlight the desired option then
press down on the selector knob one time:
MONO
STEREO
REVERSE STEREO
By default, the Fury will be set to operate in stereo mode. Reverse stereo
mode allows you to flip the left and right audio channels. For example, if you
have a stereo sound (coyote on left channel, rabbit on right channel), but
you would prefer that each sound come out of the opposite speaker, simply
select reverse stereo mode. This can be changed during sound playback.
NOTE: Make sure you have read and understand the FOXFADE
section as making changes here will directly affect how FOXFADE
will work.
Play Mode
This menu allows you to specify which play mode the Fury will operate on.
To change the play mode, use the selector to highlight the desired option
then press down on the selector knob one time:
REPEAT MODE (plays sounds/sequences continuously)
SINGLE PLAY MODE (plays sounds/sequences once)
JUKEBOX MODE (plays sounds/sequences incrementally)
NOTE: By default, REPEAT will be set as the play mode.
AUTO-V
You can turn AUTO-V on or off by highlighting the desired one and press
down on the selector knob one time. See section on AUTO-V for more
details.
7.2 TRANSMITTER CONFIG MENU
This menu allows to you setup how the TX-500 will operate. Everything from
contrast to how the AUX button performs will be configurable through these