User's Manual

the rotary selector knob. As you can see, even with hundreds of sounds
programmed, you can be set up to be never more than a few revolutions of the
rotary sound selector knob away from any sound.
Numerical Entry Method:
You can also directly access any sound by direct numerical entry on the
keypad. For example, if you want to play sound 005, simply press the numbers
0, 0, and 5 sequentially on the keypad.
6.5 SETTING THE VOLUME
When the TX-500 is first turned on, the volume setting is preset to 00, as the
display will indicate. Once you have selected and transmitted your sound to
the FURY, simply depress the volume up button on the transmitter to your
desired level. Note that you can depress and hold down on the volume button
to continue to ramp, or you can continue to press and release the button to
ramp. Depressing the volume buttons will cause the volume number to change
in the display from a low of “0” to a high of “40”. These changes are
transmitted to the FURY in real time, causing the volume to ramp up or down.
The TX-500 allows you to change the volume ramp speed to a specific level.
By default, the ramp speed will be set to 4. This means that every time you
press the volume up or down button, the volume level will increment or
decrement by 4. You can change this value to 2, 4, 5, 8, or 10. To set this
value:
1) Press and hold the rotary selector knob to access the main menu.
2) Highlight the “TRANSMITTER CONFIG” menu and depress the rotary
selector knob one time.
3) Use the selector knob to highlight “VOLUME STEPS” and then depress
the selector knob one time.
4) Use the selector knob to highlight the desired volume ramping value
and then depress the selector knob to lock it in.
5) Exit the menu.
The volume numbers are important, as you will begin to identify your preferred
volume settings, and with the FURY placed away from you, it gives you the
ability to know exactly what volume the FURY is playing at. Without this, you
may have a difficult time determining just how loud or soft your unit is playing.
6.6 MUTE
To mute the current sound that is playing, simply depress the mute button on