11.2.1 for Windows

Foxit PDF Editor
Chapter 5: Edit User Manual
181
Bevel joins.
 Miter — the outer edges of the strokes for the two segments are
continued until they meet. If the extension projects too far, as
determined by the miter limit, a bevel join is used instead.
 Round — a circular arc with a diameter equal to the line width is drawn
around the point where the segments meet and filled in, producing a
rounded corner.
 Bevel — the two path segments are drawn with butt end caps (see the
discussion of line cap style), and the resulting notch beyond the ends of
the segments is filled in with a triangle.
Miter Round Bevel
Square line cap style Round line cap style Flat line cap style
 Line Cap Style: The line cap style specifies the shape to be used at the ends
of open sub paths when they are stroked. Allowed values are Butt end caps,
Round end caps, and Projecting Square End.
 Square: --- the stroke is squared off at the endpoint of the path.
 Round: --- a semicircular arc with a diameter equal to the line width is
drawn around the endpoint and filled in.
 Flat: --- the stroke extends beyond the end of the line by a distance that
is half the line width and is squared off.
Square Round Flat
 Dash: Select a type of line, dashed or solid.
 Opacity: Enter a value, or drag the slider to specify the opacity. Opacity can
range from 1% to 100%. For transparent paint or a weak effect, specify a low
percentage value; for more opaque paint or a strong effect, specify a high
value.