11.2.1 for Windows

Foxit PDF Editor
Chapter 5: Edit User Manual
180
of the objects.
⚫ Width and Height: Displays the selected object’s width and height values.
3. In Image Object Properties dialog box, in the Appearance tab, drag the slider or
enter a value to specify the opacity of the image object. Opacity can range from
1% to 100%. For transparent paint or a weak effect, specify a low percentage value;
for more opaque paint or a strong effect, specify a high value.
4. In shape object properties dialog box, please do any of the following:
 Stroke Color: The stroke color is used to paint the border of paths and text
that are stroked.
 Fill Color: The fill color is used to paint the interior of paths and text
characters that are filled.
 Line Width: The line width specifies the thickness of the line used to stroke a
path and is measured in user space units. A line width of 0 specifies the
thinnest line that can be rendered on the output device. The default value is
1.
Note: A line width of 0 is an inherently device-dependent value. Its use is
discouraged because the line may be nearly invisible when printing on high-
resolution devices.
 Miter limit: When two line segments meet at a sharp angle it is called a Miter
join and has been specified as the line join style. It is possible for the miter to
extend far beyond the thickness of the line stroking the path. The miter limit
imposes a maximum on the ratio of the miter length to the line width, as
shown in the following figure. When the limit is exceeded, the join is
converted from a miter to a bevel.
The value for miter limit is a number that must be greater than or equal to 1,
and has a default value of 10.
Miter length
 Line Join Style: The line join style specifies the shape to be used at the corners
of paths that are stroked. The allowed values are Miter joins, Round joins and