Quick start Guide

REMOVING/CHANGING THE
STANDARD MOUNT
REMOVING/CHANGING THE
¼”-20 & COLD-SHOE MOUNT
MOUNTING TO DEVICES
1 1
2 2
3 3
Start with the Rugo
™
2 positioned so that
the Thumbscrews are on top.
Start with the Rugo
™
2 positioned so that
the Thumbscrews are on top.
Twist each Thumbscrew counter-clockwise
until they become loose. They should then
be ready to pull out completely.
Twist each Thumbscrew counter-clockwise
until they become loose. They should then
be ready to pull out completely.
ACTION CAM
The Rugo
™
2 can be mounted to an
Action Cam via the removable Standard
Mount. Line up the mounts on the Rugo
™
2 with the mounts on the Action Cam and
then tighten the Mount Knobs.
CAMERA
The Rugo
™
2 can be mounted to a DSLR
camera via the removable Cold-shoe
Mount. Simply slide the mount onto the
camera flash attachment and twist the
Locking Ring until securely fastened.
TRIPOD OR PUCK ADAPTOR
The Rugo
™
can be mounted to most
tripods or to the Puck Adaptor
(purchased separately) via the ¼"-20
Mount. Twist the threaded hole of the
Rugo
™
¼"-20 Mount onto the screw of
the tripod or Puck. Then, twist the Rugo
™
and Puck until it is securely fastened.
USING THE TRI-LENS
™
25°
BEAM DISTANCE: 100 ft (30 m)
USED FOR: Distance
SPOT
FLOOD
120°
BEAM DISTANCE: 10 ft (3 m)
USED FOR: Close-up
AREA
55°
BEAM DISTANCE: 30 ft (10 m)
USED FOR: Mid-range
NOTE: Orientation of Mount Knobs
should match as shown above.