Installation Instructions
52
Hardware Installation
2. Align the NVMe SSD assembly with the posts in the server.
3. Slide the NVMe assembly until the connectors are fully engaged. Make sure the posts on the
cage have locked onto the bottom of the SSD carrier.
4. Secure the NVMe SSD assembly with the screw.
)LJXUH ,QVWDOOLQJDQ190H66'$VVHPEO\
5. Install the K2C-AB. See “Installing a K2C-AB” on page 47.
Install the interposer assembly. See “Installing an Interposer Assembly” on page 41.
7. Replace the top cover on the server. See “Installing a Top Cover” on page 11.