Installation Instructions
28
Hardware Installation
3.6.4. Installing a Panel Mount
Follow these steps to remove a power distribution board:
1. Align the panel mount with the bracket. Ensure the marking on the module is correctly positioned
with the correlating slit on the bracket.
)LJXUH $VVHPEOLQJD3DQHO0RXQW
2. Insert the module in the bracket and slide it to the locking position.
3. Align the panel assembly over the location on the chassis. Make sure the connectors are facing
LQWHUQDOO\WRFRQQHFWZLWKWKH3'%
)LJXUH ,QVWDOOLQJD3DQHO0RXQWLQD%UDFNHW