NETBOX User’s Manual
Trademark: All trademarks are the property of their respective owners. Version: User’s Manual V1.0 for NETBOX. P/N: 3A2231600-000-G CA UT IO N Symbol description: ! Caution : refers to important information that can help you to use NETBOX better, and tells you how to avoid problems. WEEE: The use of this symbol indicates that this product may not be treated as household waste.
CA UT IO N Safety Notice : ! Before using this product, please read the below safety notice carefully, this will help to extend the product’s lifecycle, and work normally. ■ When NETBOX is working, please make sure its ventilation system is working. ■ The power adapter is dissipating heat during normal use, please be sure not to cover it and keep it away from your body to prevent discomfort or injury by heat exposure.
Table of Contents Chapter 1 Introducing the NETBOX Top ���� View....................................................................................................2 Front Side ���� View.........................................................................................2 Back Side ���� View.........................................................................................3 ............ Bottom View..............................................................................................
The NETBOX is a compact and easy to use desktop. It features all the desktop capabilities but with a slim body design which enables your to browse the internet in a relax and comfortable way.
1 Introduction NETBOX features all the desktop capabilities but with a slim body design which enables you to browse the internet in a relaxable and comfortable way. 1-1 Top View 190mm 135mm 1-2 Front Side View 24mm 1 2 3 4 5 6 7 No. Name Description 1 Headphone Port Connects to a headphone 2 Microphone In and S/PDIF In Port Connects to a microphone or playback devices with optical connectors(3.5mm jack) 3 Multi-Function Card Reader Support SD/SDHC/MS/MS Pro/MMC memory cards 4 USB 3.
1-3 Back Side View 1 1 2 3 4 5 6 7 No. Name Description 1 RF(Radio Frequency) Port Connects to antenna 2 USB 2.0 Ports Connects to USB devices 3 Display Output Port Connects to display device 4 HDMI Port Connects to HDMI audio and video 5 Network Port Standard RJ-45 network port 6 Line Out and S/PDIF Out Port Connects to powered analog speakers or recording devices with optical connectors(3.5mm jack) 7 Power Input Port Connects to the power adapter 1-4 Bottom View 1 No.
In this chapter, the placement and the connection of some necessary peripherals will be introduced.
2-1 Placement of NETBOX 1. On the Desk 1. You can install your NETBOX in the mount like the right image. 2 2. If there is enough space on your desk, you can simply put your NETBOX on the tabletop as shown below. 2. On the Display Back CA UT IO N This is the best space-saving way. 1. Use four screws to fasten the bracket onto the display back. ! To install this bracket, your display must follow VESA75/VESA100 standard.
2. Fit the NETBOX into the bracket with power button locating at the top for easy touch. 2 2 1 3. After that, you can connect the antenna to your NETBOX. CA UT IO N ! Remove the antenna and lift up the NETBOX straightly to take it out.
2-2 Connection of NETBOX 1. Connect the Antenna Connect the antenna to the RF port of the NETBOX. You can fold the antenna and rotate it in different angle as you want. 2 1 2 2. Connect the Monitor Connect a monitor to the NETBOX through DVI connector. 3. Connect the USB Devices Connect USB devices to the USB ports of the NETBOX, for example, mouse and keyboard.
4. Connect the Network Cable 2 Connect LAN cable to the RJ-45 port, with the other end connected to a hub or switch. Hub or Switch 5. Connect the Power Cord Connect the power adapter to the power input port of the NETBOX, and push the power button to start it. 1 Outlet 3 CA UT IO N 2 ! The power adapter is dissipating heat during normal use, please make sure not to cover it and keep it away from your body to prevent discomfort or injury from heat exposure.
This chapter introduces the Windows installation : ■ Install Windows 7 ■ Install Drivers in Windows 7
Make sure you have these ready : 1. NETDVD. (It is an optional accessory. If there is no NETDVD in this package, you need other purchase an external USB DVD-ROM drive.) 2. NETBOX driver CD. (In this package) 3. Windows 7 Install CD. (Other purchase) 3 Before we continue : ■ ■ Your NETBOX power is off. Connect the NETDVD or USB DVD-ROM drive to one USB port of NETBOX and power it on. 3-1 Install Windows 7 1. Push power on button to turn on your computer, then press key to enter BIOS Setup. 2.
4. The computer will reboot, and it will start loading the files for installing the Windows 7 Operating System. 5. After the computer reboots it will start loading the files for installing Windows 7. Click “Next” to continue and click “Install now” button to start the setup. 6. When the license terms appear choose accept and click “Next” to continue. 7. It will then ask you to select the installation type. Click “Custom (advanced)” to install a new copy of Windows. 3 8.
3 9. In the hard disk size screen, you can click the “new” button to create partitions as you need. In this example we are creating a 70GB partition to install Windows. Make your modifications and click “Apply”. To ensure that all Windows features work correctly, Windows might create additional partitions for system files. So you will see a 100MB partition reserved by system after you create a partition. Select the 70GB partition and click “Next” to continue.
10. The setup program will then start to install Windows 7 on your hard disk. During the installation, your computer will restart several times. 3 11. When the installation is complete, setup will prepare your computer for it’s first use. You can then follow the steps to select system settings, create an account, set a password...etc, until the whole process is complete.
3-2 Install Drivers in Windows 7 3 1. When the Windows 7 is completely installed, you have to install the necessary drivers before using the NETBOX. Take out the Windows 7 Install CD from the USB DVD-ROM drive, and put the NETBOX driver CD inside. 2. Waiting for a few seconds, the main menu will be displayed on the screen. 3. Use these options to install all the drivers for your system. You must click "AMD Chipset Driver" to install it first.
