User`s manual

Chapter 6 Special BIOS Functions

Hard Disk Selection:

The hard disk selection menu will be displayed after you press the hotkey,

listing all the IDE HDDs installed in your system. You can switch the highlight

bar to make a selection and press <Enter> to confirm it.

Attention:

1.Make sure that you have selected a HDD before entering the main menu.

2.Make sure that the HDD you selected is ATA5 or higher. For HDDs lower

than ATA5, there will be a “No Support” message in the HDD list menu

listing beside the name of it.

3.Only one HDD can be operated at a time.

Note: If you have assigned a password to the selected HDD, you will be

prompted to provide it before proceeding.

PDF 文件使用 "pdfFactory" 试用版本创建 www.fineprint.com.cn