User`s manual

Chapter 3 BIOS Description
46
vPrimary IDE 0, Secondary IDE 0 (Default: Disabled)
When these items are enabled, the system will restart the power saving timeout
counters when any activity is detected on any of the drives or devices on the
primary or secondary IDE channels. The setting values are Disabled and Enabled.
vFDD, COM, LPT Port (Default: Disabled)
When this item is enabled, the system will restart the power saving timeout
counters when any activity is detected on the floppy disk drive, serial port, or
the parallel port.
vPCI PIRQ[A-D]# (Default: Disabled)
When this option is disabled, any PCI device set as the Master will not power
on the system.
PDF 文件使用 "pdfFactory" 试用版本创建 www.fineprint.com.cn