User`s manual

Chapter 3 BIOS Description

vSecurity Option (Default: Setup)

When it is set to “Setup”, a password is required to enter the CMOS Setup

screen; When it is set to “System”, a password is required not only to enter

CMOS Setup, but also to startup your PC.

vAPIC Mode (Default: Enabled)

This option is used to enable or disable APIC function.

vMPS Version Control For OS (Default: 1.4)

This option is used to set up the version of MPS Table used in NT4.0 OS.

vOS Select For DRAM > 64MB (Default: Non-OS2)

This item is only required if you have installed more than 64 MB of memory

and you are running the OS/2 operating system. Otherwise, leave this item at

the default.

vFull Screen LOGO Show (Default: Enabled)

This item allows you to enable or disable full screen logo. The available

setting values are: Disabled and Enabled.

vSmall Logo (EPA) Show (Default: Disabled)

This item allows you to enable or disable the EPA logo. The available setting

values are: Disabled and Enabled.

PDF 文件使用 "pdfFactory" 试用版本创建 www.fineprint.com.cn