User`s manual

Chapter 3 BIOS Description

vTM2 Bus VID (Default: depend on CPU)

Represents the voltage of the throttled performance state that will be initiated

when the on-die sensor goes from not hot to hot.

vLimit CPUID MaxVal (Default: Disabled)

The option is used to set limit CPUID MaxVal. The available setting values are:

Disabled and Enabled.

vHard Disk Boot Priority

This option is used to select the priority for HDD startup. After pressing <Enter>,

you can select the HDD using the <PageUp>/<PageDn> or Up/Down arrow

keys, and change the HDD priority using <+> or <->; you can exit this menu by

pressing <Esc>.

vNet work Boot Priority

This option is used to select the priority for network startup. After pressing

<Enter>, you can select the network using the <PageUp>/<PageDn> or Up/

Down arrow keys, and change the network priority using <+> or <->; you can

exit this menu bypressing <Esc>.

vVirus Warning (Default: Disabled)

Allows you to choose the VIRUS warning feature for IDE hard disk boot sector

protection. If this function is enabled and someone attempts to write data into

this area, BIOS will show a warning message on screen and an alarm will

beep. The setting values are: Disabled and Enabled.

Note: Such function provides protection to the start-up sector only; it does

not protect the entire hard disk.

vCPU L1 & L2 Cache (Default: Enabled)

This option is used to turn on or off the CPU L1 and L2 cache. The available

setting values are: Disabled and Enabled.

vCPU L3 Cache (Default: Enabled) (optional)

This option is used to turn on or off the CPU L3 cache. The available setting

values are: Disabled and Enabled.

vHyper-Threading Technology (Default: Enabled)

This option is used to turn on or off the Hyper-Threading function of the CPU.

The available setting values are: Disabled and Enabled.

Note: This function will not be displayed until a CPU that supports Hyper-

Threading has been installed.

PDF 文件使用 "pdfFactory" 试用版本创建 www.fineprint.com.cn