User`s manual

Chapter 2 Installation Instructions

Other Connectors

This motherboard includes connectors for FDD devices, IDE devices, Serial ATA

devices, USB devices, IR module, and others.

FDD Connector: FLOPPY

(Please refer to the 11th item of motherboard layout.)

This motherboard includes a standard FDD connector, supporting 360 K, 720 K,

1.2 M, 1.44 M, and 2.88 M FDDs.

IDE Connectors: IDE_1, IDE_2

(Please refer to the 12th and 22th item of motherboard layout.)

The 12th connector supports Ultra ATA 100/66/33 IDE hard disk drives. The

22th connector supports Ultra ATA 133/100/66/33 IDE hard disk drives. Con-

nect the cable’s blue connector to the IDE connector, then connect the gray

connector to the slave device (hard disk drive) and the black connector to the

Ultra ATA master device.

Attention:

Ribbon cables are directional, therefore, make sure to always con-

nect with the cable on the same side as pin 1 of the IDE_1, IDE_2

or FDD connector on the motherboard.

PDF 文件使用 "pdfFactory" 试用版本创建 www.fineprint.com.cn