User`s manual

Chapter 2 Installation Instructions
10
Memory
This motherboard includes four 240-pin slots with 1.8 V for DDR2. These slots
support 256 Mb, 512 Mb and 1 Gb DDR2 technologies for x8 and x16 devices, and
support maximum memory bandwidth of 8.5GB/s using DDR2 533 memory, 10.
7GB/s using DDR2 667 in Dual-Channel interleaved mode, You must install at
least one memory bank to ensure normal operation.
Installation of DDR2 Memory
1.There is only one gap near the center of the DIMM slot, and the memory
module can be fixed in one direction only. Unlock a DIMM slot by pressing the
module clips outward.
2.Align the memory module to the DIMM slot, and insert the module vertically
into the DIMM slot.
3.The plastic clips at both sides of the DIMM slot will lock automatically.
Warning :
Be sure to unplug the AC power supply before adding or removing
expansion cards or other system peripherals, especially the
memory devices, otherwise your motherboard or the system
memory might be seriously damaged.
128 Pins
112 Pins
For the detailed memory support list on this motherboard, please visit the
website: http://www.foxconnchannel.com
PDF 文件使用 "pdfFactory" 试用版本创建 www.fineprint.com.cn