Instructions / Assembly

11. Install the Wi-Fi Vibration Sensor onto the desired location with the
included mounting tape.
10. Press "
Pair " in the FS Home App within 10 seconds of hearing the
tone or seeing the LED flash.
9. Insert 3 new AAA batteries. Make sure you insert the batteries in the
correct polarity. Press and hold the round button until a tone is
heard. If you do not hear a tone, look for the LED to turn
ON for 2
seconds. The sensor will now enter “Pairing Mode”.
Important: When pairing is successful, a new device will be
added to your Device page. If unsuccessful, repeat from Step
5 but there is no need to remove the batteries.
Button
LED