Wi-Fi Control Button FS-CB100 Quick Start Guide
What’s in the Box Wi-Fi Control Button FS-CB100 Quick Start Guide Wi-Fi Control Button 2 X AAA Batteries Quick Start Guide
Safety Instructions • Practice safe installation habits while installing the Wi-Fi Control Button. • Your Wi-Fi Control Button is intended for indoor use only. • Do not tamper with or make any modifications to your Wi-Fi Control Button. • Make sure you replace batteries with 2 new AAA alkaline batteries. Insert batteries in the correct polarity as shown inside the battery case. • Properly dispose of old batteries in accordance with local regulations. Do not discard with any other household waste.
Wi-Fi Control Button Installation and App Setup 1. Download the FS Home App from the App Store or Google Play. App Store is a service mark of Apple Inc. Google Play and the Google Play logo are trademarks of Google LLC. 2. Connect your smartphone or tablet to your local 2.4GHz Wi-Fi network.
3. Launch the FS Home App. 4. Sign up for an account or Login with your email or password. 5. Go to "Device" and press "+" in the upper right-hand of the screen and follow the on-screen pairing instructions. Make sure your phone is connected to a 2.4GHz Wi-Fi network Wi-Fi NAME •••••••• Important: Ensure that the network name or SSID is the desired network you want the devices to use. If it is different from your smartphone’s Wi-Fi settings, your device pairing will be unsuccessful. 6.
7. Open the front cover of the Control Button by holding the back cover firmly and pulling open the front from the top. Do NOT unscrew the four screws on the back. 8. Scan the device QR-Code/UID with your smartphone or tablet or enter it manually.
9. Insert the batteries into the Control Button. 10. Press "Pair" in the FS Home App within 10 seconds of inserting the batteries. Important: When pairing is successful, a new device will be added to your Device page. If unsuccessful, repeat Step 5. 11. While still in the FS Home App, go to the Wi-Fi Control Button settings and program the button to activate or control specific actions or scenes for your Fox & Summit Wi-Fi buttons, lights, and/or plugs.
Troubleshooting 1. Pairing Unsuccessful a. Make sure that your smartphone or tablet is connected to the desired Wi-Fi network. b. Make sure that the Wi-Fi network your smartphone or tablet is connected to is a 2.4GHz network, not a 5GHz network. This is only necessary when pairing. c. Make sure that the Wi-Fi signal is strong at the desired installation location. d. Unplug or power down other Wi-Fi devices to minimize wireless interference during setup. e.
FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Please note that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
--Consult the dealer or an experienced radio/TV technician for help. CE marking on this product represents the product is in compliance with all directives that are applicable to it. Correct Disposal of this product This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.
Battery Safety Information Caution: Keep batteries away from small children. Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries promptly in accordance with local regulations. WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov.
SG-CB100 V.02 10/2018 Fox & Summit USA, LLC | 562.758.8829 | www.foxandsummit.com © 2018 Fox & Summit USA LLC. All Rights Reserved.
