Instructions / Assembly

ManualsBrandsFox & Summit ManualsSmart HomeHome Security Sensor Bundle

Wi-Fi Indoor Plug

FS-IP100

Quick Start Guide

Summary of content (35 pages)

PAGE 1
Wi-Fi Indoor Plug FS-IP100 Quick Start Guide
PAGE 2
What’s in the Box Wi-Fi Indoor Plug FS-IP100 Quick Start Guide Wi-Fi Indoor Plug Quick Start Guide
PAGE 3
Safety Instructions • Be sure there are no exposed wires from the wall outlet or Wi-Fi Indoor Plug before installation. • Your Wi-Fi Indoor Plug is intended for indoor use only. • Do not tamper with or make any modifications to your Wi-Fi Indoor Plug. • Do not insert your Wi-Fi Indoor Plug into a wall outlet if the device or wall outlet is wet or there is moisture around the desired area of installation. • Plug directly and completely flush into the wall outlet.
PAGE 4
Wi-Fi Indoor Plug Installation and App Setup 1. Insert your Wi-Fi Indoor Plug into the desired wall outlet location. Wi-Fi Indoor Plug Power Rating: Input: AC 100-120V, 50-60Hz AC Outlet: AC 100-120V, 50-60Hz, Maximum Output 10A Consumption: Typ. < 1W 2. Download the FS Home App from the App Store or Google Play. App Store is a service mark of Apple Inc. Google Play and the Google Play logo are trademarks of Google LLC.
PAGE 5
3. Connect your smartphone or tablet to your local 2.4GHz Wi-Fi network. Your Smartphone Your Wi-Fi Router 4. Launch the FS Home App. 5. Sign up for an account or Login with your email or password. 6. Go to "Device" and press "+" in the upper right-hand of the screen and follow the on-screen pairing instructions. Make sure your phone is connected to a 2.
PAGE 6
Important: Ensure that the network name or SSID is the desired network you want the devices to use. If it is different from your smartphone’s Wi-Fi settings, your device pairing will be unsuccessful. 7. Enter your Wi-Fi network password. 8. Scan the device QR-Code/UID with your smartphone or tablet or enter it manually.
PAGE 7
9. Insert Indoor Plug into an available power outlet. Once it has beeped, press and hold the button on the front of the plug until it emits one long beep, then release the button. Button 10. Press "Pair" in the FS Home App within 10 seconds of releasing the button on the front of the Indoor Plug. Important: When pairing is successful, a new device will be added to your Device page. If unsuccessful, repeat Step 6.
PAGE 8
Troubleshooting 1. Pairing Unsuccessful a. Make sure that your smartphone or tablet is connected to the desired Wi-Fi network. b. Make sure that the Wi-Fi network your smartphone or tablet is connected to is a 2.4GHz network, not a 5GHz network. This is only necessary when pairing. c. Make sure that the Wi-Fi signal is strong at the desired installation location. d. Unplug or power down other Wi-Fi devices to minimize wireless interference during setup. e.
PAGE 9
FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Please note that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
PAGE 10
--Consult the dealer or an experienced radio/TV technician for help. CE marking on this product represents the product is in compliance with all directives that are applicable to it. Correct Disposal of this product This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.
PAGE 12
Wi-Fi Outdoor Motion Triggered Spot Light FS-OMSL100 Quick Start Guide
PAGE 13
What’s in the Box Wi-Fi Outdoor Motion Triggered Spot Light FS-OMSL100 Quick Start Guide Wi-Fi Outdoor Motion Triggered Spot Light Mounting Screws and Masonry Plugs Quick Start Guide
PAGE 14
Safety Instructions • Practice safe installation habits while installing the Wi-Fi Outdoor Motion Triggered Spot Light. • Do not tamper with or make any modifications to your Wi-Fi Outdoor Motion Triggered Spot Light. • Make sure you replace batteries with 4 D-Cell alkaline batteries. Insert batteries in the correct polarity as shown inside the battery case. • Properly dispose of old batteries in accordance with local regulations. Do not discard with any other household waste.
PAGE 15
Wi-Fi Outdoor Motion Triggered Spot Light Installation and App Setup 1. Download the FS Home App from the App Store or Google Play. App Store is a service mark of Apple Inc. Google Play and the Google Play logo are trademarks of Google LLC. 2. Connect your smartphone or tablet to your local 2.4GHz Wi-Fi network.
PAGE 16
3. Open the front of the Outdoor Motion Sensor Light by twisting the front counterclockwise (to the left). 4. Pull the battery case out of the light case as shown below. 5. Push the tabs on the sides of the battery case to remove the cover. 6. Insert 4 new D Type alkaline batteries. Make sure you insert the batteries in the correct polarity. Do NOT close the battery cover yet 7. Launch the FS Home App. 8. Sign up for an account or Login with your email or password.
PAGE 17
9. Go to "Device" and press "+" in the upper right-hand of the screen and follow the on-screen pairing instructions. Make sure your phone is connected to a 2.4GHz Wi-Fi network Wi-Fi NAME •••••••• Important: Ensure that the network name or SSID is the desired network you want the devices to use. If it is different from your smartphone’s Wi-Fi settings, your device pairing will be unsuccessful. 10. Enter your Wi-Fi network password.
PAGE 18
11. Scan the device QR-Code/UID with your smartphone or tablet or enter it manually. Device QR-Code UID 12. Replace the battery casing cover. When you see the Passive Infrared Sensor (PIR, the little dome on the front of the light) flashing blue, it is in pairing mode. 13. Press "Pair" in the FS Home App within 10 seconds of putting on the battery cover. Important: When pairing is successful, a new device will be added to your Device page. If unsuccessful, repeat Step 9. 14.
PAGE 19
Troubleshooting 1. Pairing Unsuccessful a. Make sure that your smartphone or tablet is connected to the desired Wi-Fi network. b. Make sure that the Wi-Fi network your smartphone or tablet is connected to is a 2.4GHz network, not a 5GHz network. This is only necessary when pairing. c. Make sure that the Wi-Fi signal is strong at the desired installation location. d. Unplug or power down other Wi-Fi devices to minimize wireless interference during setup. e.
PAGE 20
FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Please note that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
PAGE 21
--Consult the dealer or an experienced radio/TV technician for help. CE marking on this product represents the product is in compliance with all directives that are applicable to it. Correct Disposal of this product This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.
PAGE 22
Battery Safety Information Caution: Keep batteries away from small children. Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries promptly in accordance with local regulations. WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov.
PAGE 24
Wi-Fi Window/Door Sensor FS-WDS100 Quick Start Guide
PAGE 25
What’s in the Box Wi-Fi Window/Door Sensor FS-WDS100 Quick Start Guide Wi-Fi Window/Door Sensor Quick Start Guide Screwdriver 2 AAA Batteries
PAGE 26
Safety Instructions • Practice safe installation habits while installing the Wi-Fi Window/ Door Sensor. • Your Wi-Fi Window/Door Sensor is intended for indoor use only. • Do not tamper with or make any modifications to your Wi-Fi Window/ Door Sensor. • Make sure you replace batteries with 2 new AAA alkaline batteries. Insert batteries in the correct polarity as shown inside the battery case. • Properly dispose of old batteries in accordance with local regulations.
PAGE 27
Wi-Fi LED Window/Door Sensor Installation and App Setup 1. Download the FS Home App from the App Store or Google Play. App Store is a service mark of Apple Inc. Google Play and the Google Play logo are trademarks of Google LLC. 2. Connect your smartphone or tablet to your local 2.4GHz Wi-Fi network.
PAGE 28
3. Launch FS Home App. 4. Sign up for an account or Login with your email or password. 5. Go to "Device" and press "+" in the upper right-hand of the screen and follow the on-screen pairing instructions Make sure your phone is connected to a 2.4GHz Wi-Fi network Wi-Fi NAME •••••••• Important: Ensure that the network name or SSID is the desired network you want the devices to use. If it is different from your smartphone’s Wi-Fi settings, your device pairing will be unsuccessful. 6.
PAGE 29
7. Using the provided screwdriver to remove the battery cover. Do NOT unscrew the four screws on the back of the sensor. Unscrew this one to open 8. Scan the device QR-Code/UID with your smartphone or tablet or enter it manually. Device QR-Code UID 9. Insert 2 new AAA batteries. Make sure you insert batteries in the correct polarity.
PAGE 30
10. Press "Pair" in the FS Home App within 10 seconds of inserting the batteries. Important: When pairing Pairing is successful, a new device will be added to your Device page. If unsuccessful, repeat Step 5. 6. 11. Install the Wi-Fi Window/Door Sensor onto the desired window or door with the included adhesive strips. Recessed Door Sliding Window Cupboard Sensor and magnet must be 0.5in (12mm).
PAGE 31
Troubleshooting 1. Pairing Unsuccessful a. Make sure that your smartphone or tablet is connected to the desired Wi-Fi network. b. Make sure that the Wi-Fi network your smartphone or tablet is connected to is a 2.4GHz network, not a 5GHz network. This is only necessary when pairing. c. Make sure that the Wi-Fi signal is strong at the desired installation location. d. Unplug or power down other Wi-Fi devices to minimize wireless interference during setup. e.
PAGE 32
FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Please note that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
PAGE 33
--Consult the dealer or an experienced radio/TV technician for help. CE marking on this product represents the product is in compliance with all directives that are applicable to it. Correct Disposal of this product This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.
PAGE 34
Battery Safety Information Caution: Keep batteries away from small children. Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries promptly in accordance with local regulations. WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov.