Instructions / Assembly

Important: When pairing is successful, a new device will be
added to your Device page. If unsuccessful, repeat Step 9.
Device QR-Code
UID
11. Scan the device QR-Code/UID with your smartphone or tablet or
enter it manually.
14. While still in the App, go to the Wi-Fi Outdoor Motion Triggered
Spot Light settings in the App to change the operation of the Wi-Fi
Outdoor Motion Triggered Spot Light.
12. Replace the battery casing cover. When you see the Passive
Infrared Sensor (PIR, the little dome on the front of the light)
flashing blue, it is in pairing mode.
13. Press "
Pair " in the FS Home App within 10 seconds of putting on
the battery cover.