Wi-Fi LED Light Bulb FS-LB100 Quick Start Guide
What’s in the Box Wi-Fi LED Light Bulb FS-LB100 Quick Start Guide Wi-Fi LED Light Bulb Quick Start Guide
Safety Instructions • Be sure your light fixture or lamp is switched OFF before installing the Wi-Fi LED Light Bulb. • Your existing light bulb may be HOT, so allow the bulb to cool down before removing. • Do not put your fingers in the exposed light bulb socket. • Practice safe installation habits while installing your Wi-Fi LED Light Bulb. • Properly dispose of your old light bulb and keep it out of reach of children.
Wi-Fi LED Light Bulb Installation and App Setup 1. Download the FS Home App from the App Store or Google Play. App Store is a service mark of Apple Inc. Google Play and the Google Play logo are trademarks of Google LLC.
2. Connect your smartphone or tablet to your local 2.4GHz Wi-Fi network. Your Smartphone Your Wi-Fi Router 3. Turn off the power to your light fixture and/or unplug it from its power source before removing the existing light bulb. Your existing light bulb may be HOT, so allow the bulb to cool down before removing. 4. Screw in the Wi-Fi LED Light Bulb into the light fixture or socket. Do NOT turn on the power to the fixture or socket just yet. 5. Launch the FS Home App. 6.
7. Go to "Device" and press "+" in the upper right-hand of the screen and follow the on-screen pairing instructions. Make sure your phone is connected to a 2.4GHz Wi-Fi network Wi-Fi NAME •••••••• Important: Ensure that the network name or SSID is the desired network you want the devices to use. If it is different from your smartphone’s Wi-Fi settings, your device pairing will be unsuccessful. 8. Enter your Wi-Fi network password.
9. Scan the device QR-Code/UID with your smartphone or tablet or enter it manually. Device QR-Code UID 10. Plug in or power up your light fixture with the Wi-Fi LED Light Bulb. 11. Press "Pair" in the FS Home App within 10 seconds of turning on power to the light socket.' Important: When pairing is successful, a new device will be added to your Device page. If unsuccessful, repeat Step 7.
Troubleshooting 1. Pairing Unsuccessful a. Make sure that your smartphone or tablet is connected to the desired Wi-Fi network. b. Make sure that the Wi-Fi network your smartphone or tablet is connected to is a 2.4GHz network, not a 5GHz network. This is only necessary when pairing. c. Make sure that the Wi-Fi signal is strong at the desired installation location. d. Unplug or power down other Wi-Fi devices to minimize wireless interference during setup. e.
FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Please note that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
--Consult the dealer or an experienced radio/TV technician for help. CE marking on this product represents the product is in compliance with all directives that are applicable to it. Correct Disposal of this product This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.
SG-LB100 V.02 10/2018 Fox & Summit USA, LLC | 562.758.8829 | www.foxandsummit.com © 2018 Fox & Summit USA LLC. All Rights Reserved.
Wi-Fi Outdoor Motion Triggered Spot Light FS-OMSL100 Quick Start Guide
What’s in the Box Wi-Fi Outdoor Motion Triggered Spot Light FS-OMSL100 Quick Start Guide Wi-Fi Outdoor Motion Triggered Spot Light Mounting Screws and Masonry Plugs Quick Start Guide
Safety Instructions • Practice safe installation habits while installing the Wi-Fi Outdoor Motion Triggered Spot Light. • Do not tamper with or make any modifications to your Wi-Fi Outdoor Motion Triggered Spot Light. • Make sure you replace batteries with 4 D-Cell alkaline batteries. Insert batteries in the correct polarity as shown inside the battery case. • Properly dispose of old batteries in accordance with local regulations. Do not discard with any other household waste.
Wi-Fi Outdoor Motion Triggered Spot Light Installation and App Setup 1. Download the FS Home App from the App Store or Google Play. App Store is a service mark of Apple Inc. Google Play and the Google Play logo are trademarks of Google LLC. 2. Connect your smartphone or tablet to your local 2.4GHz Wi-Fi network.
3. Open the front of the Outdoor Motion Sensor Light by twisting the front counterclockwise (to the left). 4. Pull the battery case out of the light case as shown below. 5. Push the tabs on the sides of the battery case to remove the cover. 6. Insert 4 new D Type alkaline batteries. Make sure you insert the batteries in the correct polarity. Do NOT close the battery cover yet 7. Launch the FS Home App. 8. Sign up for an account or Login with your email or password.
9. Go to "Device" and press "+" in the upper right-hand of the screen and follow the on-screen pairing instructions. Make sure your phone is connected to a 2.4GHz Wi-Fi network Wi-Fi NAME •••••••• Important: Ensure that the network name or SSID is the desired network you want the devices to use. If it is different from your smartphone’s Wi-Fi settings, your device pairing will be unsuccessful. 10. Enter your Wi-Fi network password.
11. Scan the device QR-Code/UID with your smartphone or tablet or enter it manually. Device QR-Code UID 12. Replace the battery casing cover. When you see the Passive Infrared Sensor (PIR, the little dome on the front of the light) flashing blue, it is in pairing mode. 13. Press "Pair" in the FS Home App within 10 seconds of putting on the battery cover. Important: When pairing is successful, a new device will be added to your Device page. If unsuccessful, repeat Step 9. 14.
Troubleshooting 1. Pairing Unsuccessful a. Make sure that your smartphone or tablet is connected to the desired Wi-Fi network. b. Make sure that the Wi-Fi network your smartphone or tablet is connected to is a 2.4GHz network, not a 5GHz network. This is only necessary when pairing. c. Make sure that the Wi-Fi signal is strong at the desired installation location. d. Unplug or power down other Wi-Fi devices to minimize wireless interference during setup. e.
FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Please note that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
--Consult the dealer or an experienced radio/TV technician for help. CE marking on this product represents the product is in compliance with all directives that are applicable to it. Correct Disposal of this product This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.
Battery Safety Information Caution: Keep batteries away from small children. Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries promptly in accordance with local regulations. WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov.
SG-OMSL100 V.02 10/2018 Fox & Summit USA, LLC | 562.758.8829 | www.foxandsummit.com © 2018 Fox & Summit USA LLC. All Rights Reserved.
