User Manual

5
6. Product Features
6.1 Battery System Features
The batteries have been fitted with multiple protection systems to ensure the safe operation of the system.
Some of the protection system includes:
· Inverter interface protection: Over voltage, Over current, External Short Circuit, Reverse Polarity,
Ground Fault, Over Temp, In rush current
· Battery Protection: Internal Short Circuit, Over voltage, over current, over temp, Under voltage
The battery system contains the following Interface to allow it to connect and operate efficiently.
Mira-HV25 Features:
- interface:
Power LED
This LED is used to indicate if the battery is operating effectively. A green light on this LED means the
battery is ON and operating normally.
Alarm LED
This LED is used to indicate if the battery is operating failure. A red light on this LED means the battery is
operating abnormally.
Communication Port A(CAN-1) and B(CAN-2)
Mira-HV25 has two CAN communication units in series operation, one for master control and one for
slave control.
Network interface description: CAN-1 is connected to the upper battery module, CAN-2 is connected to
the lower battery module.