Installation Guide

Step 1:
Open the APP,
login with your
end user account.
Note: After starting the APP, it will pop-up a message
‘Whether to allow positioning permissions’, please select
‘Allow’. For the PV Size, please fill in the actual capacity
of the installed solar panels.
Note: If SN has
been bound to the
plant already, APP
will go to the page
as beside. If SN
has not been bound
before, please refer
to step 3.
Step 2:
Press the ‘+’ icon on the homepage to add plant. Press the
scan icon next to the ‘Datalogger List’ to scan the QR code
label on front side of the Smart GPRS.
Step 3:
After scanning code successfully, click ‘OK’ on the top
right corner of the page, APP will pop-up a message
‘Add Datalogger’, please click ‘OK’. Complete all
required information and click ‘OK’ on the top right
corner of the page.
For End User
Note: After starting the
APP, it will pop-up a
message ‘Whether to allow
positioning permissions’,
please select ‘Allow’. For
the PV Size, please fill in
the actual capacity of the
installed solar panels.
Step 2:
Press the ‘+’ icon on the
homepage to add plant.
Press the scan icon next
to the ‘Datalogger List’
to scan the QR code
label on front side of the
Smart GPRS.
V3.0
10-203-00013-01
The manual is updated frequently. Please scan the code
to download the latest version.
E [e-mail]
W www.foxesscloud.com