Installation Guide

Please make sure the inverter will be installed with a proper
distance as shown below.
Quick Installation Guide
R Series Inverter
2.Inverter Installation
1.Packaging List
1
2
3
A
E
F
G
H
I
J
K
L
M
N
O
P
B
C
D
≥1000
≥450
≥600
≥600
≥200
Position
Min Size
Left
Right
Top
Bottom
Front
600 mm
600 mm
450 mm
200 mm
1000 mm
Step 1: Hanging Plate Assembly
Install the Inverter on a bracket or wall by means of the
hanging plate. The hanging plate assembly diagram and the
size of the assembled hanging plate are shown as below:
4 PCS of M4*10 screws
Hanging Plate Assembly Diagram
850
48
335
240
802
898
105
4-
φ
12
50
The Size of Hanging Plate
Step 2: Bracket-mounted Installation or Wall-mounted Installation
Mode 1: Bracket-mounted Installation
1. Place the assembled hanging plate on a PV bracket, adjust
the angle with a level, mark drilling positions, and drill holes
with an electric drill (with a φ12 drill bit).
2. Fix the hanging plate with bolts.
A
B
A: 4 PCS of M10*45 hexagon bolts
B: 4 PCS of hexagon nuts
Mode 2: Wall-mounted Installation
Step 3: Inverter Installation
1.Place the assembled hanging plate at the installation site, adjust
the angle with a level, and mark drilling positions.
2.Drill holes with a hammer drill (with a φ12 drill bit), clear
holes, insert 4 PCS of expansion bolts (by client, M10*95 is
recommended) into holes, and fix them with a rubber hammer.
1.Lift the inverter from the package box with 4 PCS of screw-in
type handles.
A: 4 PCS of M10 hexagon nuts B: 4 PCS of expansion bolts
(M10) C: Wall
3.Fix the hanging plate with expansion bolts.
C
A
B
Screw-in type handle
Quick
Installa�on
Guide
Object
Object
Quantity
Quantity
Description
Description
Inverter A
K
L
B
C
D
I
J
1
1
4
36
1
1
DC Pin Plug
(Positive*18, Negative*18)
Left Hanging Plate
Right Hanging Plate
Hanging Plate
Connection Bar
Communication Connector
M4*10 Screw
DC Connector
(Positive*18, Negative*18)
36
1
Screw-in Type Handle
E
O
P
F
G
H
M
N
4
4
2
1
2
4
Quick Installation Guide
M10*45 Bolt Assembly
WIFI/4G/USB(Optional)
M10 Hexagon Nut
M6*50 Bolt Assembly
Ground Terminal
5mm Internal
Hexagon Wrench
1
1