Installation Guide

6
· Insert striped cable into pin contact and ensure all conductor strands
are captured in the pin contact.
· Unlock the DC connector
- Use the specified wrench tool.
- When separating the DC + connector, push the tool down from the
top.
- When separating the DC - connector, push the tool down from the
bottom.
- Separate the connectors by hand.
· Crimp pin contact by using a crimping plier. Put the pin contact with
striped cable into the corresponding crimping pliers and crimp the
contact.
➢
· Insert pin contact through the cable nut to assemble into back of the
male or female plug. When you feel or hear a “click” the pin contact
assembly is seated correctly.