Technical Specifications

6110 Abbott Drive
Omaha, NE 68110
1-877-369-2562
www.foxblocks.com
Please call toll free, 877-369-2562, or visit WWW.FOXBLOCKS.COM for more information.
© 2012 Fox Blocks
00338A Tech Doc-HV Clip.pdf
HV CLip pLaCeMent:
BOttOM ROW:
Horizontally across every joint
CORneRS:
Horizontally across each joint
Vertically on first ties
tOp ROW:
Horizontally across every joint
Vertically on second tie from every joint
OpeningS:
Vertically up wall on each side of openings
Budget:
One box for every 150 block ordered
One box = 250 Fox Block HV Clips
2
3
3
1
3 2
tHe FOX BLOCKS
HV CLip
Contractors have asked for a wire clip to secure
their Fox Block jobs together so the team at Fox
Blocks went to work designing one. Fox Block
ties are Engineered to be perfectly balanced,
spaced at 8” o/c Horizontally and Vertically, to
give at walls post concrete. This allowed us
to put all of our design into one wire clip which
helps everyone with only one sku.
Using the Fox Block HV clip eliminates
the need for truss wire completely on
your jobs. The result is that for about
1/2 the cost of the truss wire you will
get a stronger and straighter job.
The Fox Block HV Clip has been
Engineered with eight bends allowing
one clip to work horizontally
or vertically.
FOX BLOCK HV CLip pOSitiOnS
Vertical Clips in Place Horizontal Clips in Place
Note: You can skew the HV Clip a notch or two for an even tighter fit, if needed.
FOX BLOCK HV CLip Being uSed On jOBS
Vertical & Horizontal Clips
in place close to corner
Showing HV Clips holding down a
top row that has been cut down to
+/- 8” in height
Product Label
1
1
2
1
3
8”