User Manual

has to be noted, Chemical reactions of PTFE occur in
contact with molten or solute alkali metals and alkaline
earth metals, as well as with fine powders of metals in
groups 2 and 3 of the periodic system at temperatures
above 300°C-400°C. Only elementary fluorine,
chlorotrifluoride and alkali metals attack it; halogenated
hydrocarbons have a reversible swelling effect.
• The voltage stated on the type plate must correspond to
the mains voltage.
• Don’t cover the machine, even partially e.g. with metallic
plates or film, which will result in overheating.
• Ensure the heating plate is kept clean.
• Protect the machine and accessories from bumps and
impacts.
• The minimum distance between the machines; the
minimum distance between the machine and the wall is
mini. 100mm.
Inspection
• Unpack the device carefully and check for any damages
which may have arisen during transit. Please contact
the manufacturer/supplier for technical support.
Note:
If there is any apparent damage to the device,
please do not connect the power line.
4