User Manual

ManualsBrandsFOUR E'S SCIENTIFIC ManualsGeneral Purpose IncubatorsMini Dry Bath Incubator with 15 x 1.5ml Heating Block, LED Display, High Temperature Precision, Timing Control for Laboratory

第 1 页共 4 页

Mini Dry Bath Incubator INSTRUCTION

一、 product description

The MINI dry bath is a thermostatic metal bath device controlled by

a microcomputer. The instrument can be configured with various modules

and can be widely used for the preservation of various samples, the

preservation and reaction of various enzymes, the denaturation of

nucleic acids and proteins, and serum coagulation etc.

二、 Features

The dry bath function mainly includes: temperature calibration,

temperature setting, heating parameter preservation, heating parameter

retrieval and other functions

三、 Specifications:

Model

TC0401005

Temperature Control Range

RT + 5°C~100°C

Timing Range

0~99h59min

Temp. Control Accuracy

±0.5°C

Display Accuracy

±0.1°C

Heating Time (40°C to100°C Temp.)

≤15min

Dimension (mm)

164 x 116 x 98

Net Weight

0.9kg

Summary of content (4 pages)

PAGE 1
Mini Dry Bath Incubator INSTRUCTION 一、 product description The MINI dry bath is a thermostatic metal bath device controlled by a microcomputer. The instrument can be configured with various modules and can be widely used for the preservation of various samples, the preservation and reaction of various enzymes, the denaturation of nucleic acids and proteins, and serum coagulation etc.
PAGE 2
BLOCK Display yy Encode r Button Cover 四、 Detailed operation instructions 1. Temperature calibration Note: The initial use of the machine must be calibrated once, otherwise problems such as the inability to save parameters under normal use may occur. a) After power on, long press the encoder button > 3S, the system enters the calibration mode. At this time, the display only shows the temperature value and the clock value disappears, ensuring that the calibration mode is entered.
PAGE 3
goes to "HEATING" mode. e) After waiting for the system to enter the "HOLDING" mode, wait for another 20 minutes. At this time, read the standard thermometer temperature value and press the RUN/STOP button while adjusting the encoder to the standard temperature value. f) Long press the PRO key to save the calibration value. g) Repeat steps b-f to complete the calibration of the remaining temperature points. h) After the calibration is completed, re-power on switch 2.
PAGE 4
(5 groups in total), select the program group you need to save, adjust the encoder can be changed to the value you need, then long press the PRO key, you can The current parameters are saved to the corresponding parameter group for later direct call. 5. Heating parameter retrieval The saved heating parameters are retrieved via shortcuts. In the stop state, press the PRO key shortly to retrieve the saved parameters as the current operating parameters.