Installation & Assembly

Table Assembly:
ID DESCRIPTION QTY ID DESCRIPTION QTY
A
TABLE TOP
1 B
TABLE LEG
2
C
TUBE
1 D
NUT
7
E
WRENCH
1
Make sure all nuts are tightened.
Important:
Tighten each bolt nuts firmly. DO NOT over tighten any of the bolt nuts as this may strip the screws.
DO NOT sit or stand on the table as this may damage the product and cause serious bodily injury.
CONTENTS
Attached the table top(A) to the legs(B) and loosely
fasten the nuts(D) with wrench(E) provided- DO NOT
over tighten.
Assemble the table legs(B) with tube(C)
use the nuts(D) and wrench(E) provided-
DO NOT over tighten.
Thank you for purchasing this product. This product has been manufactured with the highest standards of safety and quality.
Product Name:
THREE DRAWER CONSOLE TABLE