Installation & Assembly

ManualsBrandsFoundstone ManualsOutdoor DecorRiva ResinFiberglass fall Fountain with LED Light

Table Of Contents

Diagram of fountain light(s)

LIST

Page 1. ATTENTION

Page 2. LIST

Page 3. A WHOLE UNIT FOUNTAIN.

Page 4. ONE SET FOUNTAIN WITH TWO PIECES

Page 5. TWIST AND LOCK STYLE FOUNTAIN

Page 6. FOUNTAIN ATTACHMENT LIGHT

Page 7. APPENDIX OF LIGHT DIAGRAM 1 & 2

Page 8. APPENDIX OF LIGHT DIAGRAM 3 & 4

Page 9. APPENDIX OF FOUNTAIN EXTRUSION DIAGRAM

Thank you for choosing our products. If you have any questions,

comments or concerns please feel free to contact us.

We stand behind our brand and the quality of the items we sell. We will send

new parts, or replace products at our discretion within the one year warranty

period. Before we can help, you will need to provide proof of purchase with the

date of purchase and photos of the defective merchandise. We will use the

photos to determine the cause of defect and for future quality control.

USER

MANUAL

Summary of content (6 pages)

PAGE 1
Thank you for choosing our products. If you have any questions, comments or concerns please feel free to contact us. USER MANUAL We stand behind our brand and the quality of the items we sell. We will send new parts, or replace products at our discretion within the one year warranty period. Before we can help, you will need to provide proof of purchase with the date of purchase and photos of the defective merchandise. We will use the photos to determine the cause of defect and for future quality control.
PAGE 2
Preparation: Before beginning assembly, read all warnings and safety precautions! WARNINGS & CAUTIONS: Warnings: To reduce the risk of electric shock, connect pump only to a Ground Fault Circuit Interrupter (GFCI) outlet. Do not exceed the voltage shown on the pump. Always disconnect the pump from the power source before performing any maintenance or work on the pump, light(s) or any fountain fittings. Inspect the power cord for damage before installation and/or maintenance.
PAGE 3
Diagram of water circulation for one set fountain with two pieces, by the perpendicularity links up. PUMP ASSEMBLY INSTRUCTIONS: 1. Remove the pump from the package and untie the power cord. Adjust the flow rate (if applicable) to the maximum (+) position. 2. Drag out one end PVC tube from the bottom of Fountain Upright (as shown in Fig.①.) to connect with the pump.
PAGE 4
6. Connect the power cord from the pump to a properly grounded, grounding type receptacle (GFCI). Processing circuit. Diagram of fountain light(s) LIGHT ASSEMBLY INSTRUCTIONS: 1. If product design does not contain light, ignore this chapter please 2. Please check accessories light(s) and wiring strategy if the product should attach any light. 3. Remove the transformer from the package. 4. Drag the light(s) cord attachment plug out the fountain, connect it to the transformer. 5.
PAGE 5
PAGE 6
ASSEMBLY IN STRUCTIONS: 1. Place the Ped estal① on the ground, lift th e Basin ② up and fi nd Arro w Mark and B utton a s pictu re(1), t hen se t the Basin② o n the P edesta l① and make sure th e butto n is clo sed tig htly . 2. Remove the pump fro m the packag e and u ntie th e powe r code . A djust the flow rate(if applica ble) to the ma ximum(+) position. P ass the powe r cord through the mi ddle of the Ba sin and Pedestal, then take the p lug out as sho wn in p icture( 3). 3.