Drawer Chest
WARNING Serious or fatal injury may occur from unexpected assembly or use. 1. During the assembly process, keep all parts away from babies or children. 2. Always securely fix this product to the wall. Make sure the wall area to be drilled is free from hidden electrical wires, water and gas pipes. 3. Use of tip-over restraints may only reduce, but not eliminate the risk of tip-over. 4. Unless specially designed to accommodate, do not set heavy objects on top of this product. 5.
Parts List(EN) / Teile Liste(DE) 1 10 4 2 5 11 4 4 9 5 4 4 4 4 3 7 6 15 13 8 14 15 16 17 13 x3 -2- 14 16 12 x3
Parts List(EN) / Teile Liste(DE) A B C Φ15x9mm 62+2PCS M6x35mm 62+2PCS Φ8x30mm 32+2PCS M3x12mm 60+2PCS M4x30mm 25+2PCS M3x14mm 12+1PCS D G E H F I H1 H2 J M4x16mm 12+1PCS 12PCS K 1PC 1PC -3- 1PC
Assembly Steps(EN) / Montageschritte(DE) STEP 1 B B 2 B B 3 B x 16PCS STEP 2 H1x12 H2x12 H1 x 12PCS H2 x 12PCS -4-
Assembly Steps(EN) / Montageschritte(DE) STEP 3 2 D D H2 3 D x 18PCS H2 x 6PCS -5-
Assembly Steps(EN) / Montageschritte(DE) STEP 4 B 9 B 180° D D H2 B B 9 B x 8PCS D x 18PCS H2 x 6PCS -6-
Assembly Steps(EN) / Montageschritte(DE) STEP 5 B B 7 8 A A 6 A 7 180° B B 7 1 A x 6PCS B x 8PCS -7- 2 3
Assembly Steps(EN) / Montageschritte(DE) STEP 6 9 A C 7 6 1 A x 2PCS C x 2PCS -8- 2 3
Assembly Steps(EN) / Montageschritte(DE) STEP 7 9 A C 4 C A C A 4 5 A C 4 7 When installing the panel③, the panel③ and the panel⑨ should be stressed at the same time to avoid damage.
Assembly Steps(EN) / Montageschritte(DE) STEP 8 5 4 A 7 4 A 4 5 A 9 C A C C 2 1 A x 4PCS C x 4PCS - 10 - 2 3
Assembly Steps(EN) / Montageschritte(DE) STEP 9 3 C A C A C 7 C 5 A 4 A C 4 A C 5 4 9 C 2 1 A x 8PCS C x 8PCS - 11 - 2 3
Assembly Steps(EN) / Montageschritte(DE) STEP 10 10 11 2 9 3 STEP 11 Please refer to the installation method and position on Step 11 - Lock the long side of the I L-shaped metal plate to the top board with the J screw I J I J B 1 B x 6PCS B J x 1PC I x 1PC - 12 - B
Assembly Steps(EN) / Montageschritte(DE) STEP 12 1 C C A C A 2 C C A A 9 3 1 A x 6PCS C x 6PCS - 13 - 2 3
Assembly Steps(EN) / Montageschritte(DE) STEP 13 E 13 15 14 E X6 E x 24PCS STEP 14 15 13 16 14 X6 - 14 -
Assembly Steps(EN) / Montageschritte(DE) STEP 15 B B 12 15 13 A 16 14 12 X3 A 1 2 3 A x 12PCS B x 12PCS STEP 16 B B 17 15 13 A 16 14 17 x3 A 1 A x 12PCS B x 12PCS - 15 - 2 3
Assembly Steps(EN) / Montageschritte(DE) STEP 17 D H1 13 15 12 D 14 H1 H1 D X3 D D x 12PCS H1 x 6PCS STEP 18 D H1 13 17 D 15 14 H1 H1 D D x 12PCS H1 x 6PCS - 16 - D X3
Assembly Steps(EN) / Montageschritte(DE) STEP 19 1 17 17 12 3 12 17 Make sure the ball rails section keeps in the front end of the junction when attached the drawer.
Assembly Steps(EN) / Montageschritte(DE) STEP 21 Please refer to Step 21 - Drill a hole in the wall at the required height and position for anti-falling device after product installed, and then put the K plastic part into the hole. WALL K K K x 1PC STEP 22 Move the cabinet to the appropriate position, and then use the E screw to lock the plastic part in the wall through the holes of L-shaped metal plate.
WARNING Children have died from furniture tipover. To reduce the risk of furniture tipover: TV ● ALWAYS install tipover restraint provided. ● NEVER put a TV on this product. ● NEVER allow children to stand, climb or hang on drawers, doors, or shelves. ● NEVER open more than one drawer at a time. ● Place heaviest items in the lowest drawers.
