Assembly Instructions

Measure area and determine desired mounting height.
Detach mounting plate [A] from backplate [B].
Mounting plate [A] will attach to junction box.
Remove socket ring [D] from socket [E].
Slide fabric shade [F] onto socket [E] and tighten with
socket ring [D]. Install bulb 60W max (not included).
REMOVE ALL PARTS FROM PACKAGE, BE CAREFUL NOT TO DAMAGE ANY COMPONENTS.
1.
3.
2.
4.
5.
6.
Note: Turn off switch before replacing the bulb. Make sure the bulb has sufficient time to cool down.
Do not subject the lamp to any shock while lit as shattering of glass shade may result.
A
B
D
E
F
A
B
F
D
E
C
x2
WALL SCONCE
Install light to wall. We recommend installation by a
qualified electrical professional. Backplate nuts [C] are
used to tighten light to wall.