Assembly Instructions

Bolt M6x50mm

Qty: 16 pcs

Bolt M6x25mm

Qty: 28 pcs

Washer Ø16/Ø6x2mm

Qty: 28 pcs

Screw Ø4x30

Qty: 28 pcs

Allen key

QTY: 1 pc

Hardware and Tools

Components:

Step 1:

Assemble the metal legs (6) to wooden brackets (5) by

using allen bolts B and wasshers C

Step 2:

Assemble side rails (3) into headboard (1) and footboad (2)

by using allen bolts B and washers C.

Before Starting:

1. Choose a clean, level, spacious assembly area. Avoid hard

surfaces that may damage the product.

2. Always read the instructions carefully before beginning

assembly to ensure that you have all required contents.

3. To prevent choking hazards, keep the packaging material out of

reach of small children

4. Do not over tighten the bolts as this may damage the thread.

5. Use only vendor supplied hardware to assemble. Using

unauthorized hardware could jeopardize the structural integrity

of the item.

6. The use of power tools to aid in assembly is not recommended.

Power tools can damage hardware and split wood.

Step 3:

Assemble parts from Step 1 to bottom of bed by using

allen bolts A and washers C

Step 4:

Put metal center rail (4) into cleat on headboard and

footboard

KEEP INSTRUCTIONS

FOR FUTURE USE

ASSEMBLY REQUIRES

TWO PEOPLE

PAGE 1
KEEP INSTRUCTIONS FOR FUTURE USE ASSEMBLY REQUIRES TWO PEOPLE Assembly Instructions Hardware and Tools Components: Bolt M6x50mm A Qty: 16 pcs Bolt M6x25mm B Qty: 28 pcs Washer Ø16/Ø6x2mm C Qty: 28 pcs Screw Ø4x30 D Qty: 28 pcs Step 1: Step 2: Assemble the metal legs (6) to wooden brackets (5) by using allen bolts B and wasshers C Step 3: Assemble side rails (3) into headboard (1) and footboad (2) by using allen bolts B and washers C.
PAGE 2
Assembly Instructions Continued Step 5: Assemble leg support (8) to back of headboard by using 2 screws D. Step 6: Assemble slats (7) to side rails by using screws D.