ASSEMBLY INSTRUCTIONS ASSEMBLY TIPS: 1. Remove hardware from box and sort by size. 2. Please check to see that all hardware and parts are present prior to start of assembly. 3, Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly. A ‘Warning ! 1. Don't attempt to repair or modify parts that are broken or defective. Please contact the store immediately. 2.
ASSEMBLY INSTRUCTIONS {O) SMALL LEFT DRAWER FRONT PANEL = 1BC (U) MIDDLE DRAWER FRONT PANEL =.
ASSEMBLY INSTRUCTIONS z HARDWARE IDENTIFICATION NO| DESCRIPTION QTY [NO| DESCRIPTION FIGURE QTY 1 | GLUE 40g 1PC 11 | HANDLE PCS HANDLE BOLT WOODEN DOWEL SPICS | 12 | (p4x28mm BLK) 68x30 PCS CAM BOLT SR) PCS | 13 | HINGE (35mm SR) 2PC8 CAM LOCK (®15x12mm SR) HINGE SCREW PCS | 14 (®4x15mm SR) BPS ALLEN WRENCH 6 | SCREW SR) (4mm SR) PCS | 16 1PC FLOOR PROTECTOR 7 | DOOR CATCH 388 1PC 17 PCS “L” SUPPORT IRON a ® ] 1ST | 18 293mm 8 | GLIDES (L = 450mm WHT) PCS boon scrim Pa LO | arcs GLIDES (L=350mm WHT) SET |
ASSEMBLY INSTRUCTIONS IRE @x Ss LYK \ ‘Apply glue an all wooden dowels to ensure integrity of the structure.
ASSEMBLY INSTRUCTIONS ‘Apply glue on all wooden dowels to ensure integrity of the structure.
ASSEMBLY INSTRUCTIONS STEP ‘Apply glue on all wooden dowels 10 ensure integrity of the structure.
ASSEMBLY INSTRUCTIONS STEP : STEP 7: to ensure integrity of the structure.
ASSEMBLY INSTRUCTIONS STEP 10-1 : £0 ensure integrity of the structure. STEP 10-3 : “Apply glue on all wooden dowels Insert rails in outside holes for large files. Insert rails in inside holes for small files.
ASSEMBLY INSTRUCTIONS STEP 11-2: ‘Apply fine on all wooden dowels to ensure integrity of the structure.
