Assembly Instructions

1. Prepare 6 bolt assemblies by applying a lock washer (#C) onto
the bolt (#A) then a flat washer (#D) onto that same bolt (#A).
2. Carefully place the headboard (#1) onto the top of the H/board legs (#2). Insert
4 bolt assemblies into each end of the legs (#2) and secure using the Allen wrench (#E).
1. Insert 2 threaded studs (#G)
into the holes along the sides
of the headboard (#1) and
footboard (#4). Turn right to
tighten.
2. Apply each
end of the side
rails (#5) onto
those threaded
studs (#G).
3. Apply a hex nut (#H)
then a beveled washer
(#I) onto the threaded
studs (#G). Secure the
washer using the
wrench (#J).