Assembly Instructions

Step 3
Zip up the dust cover at the bottom of the Chair.
Stand the Chair up.
Your Chair ready for use.
This Chair can only be used on a flat, level surface.
Step 4
Insert one Leg(B) into the mounting position of Chair Seat(A) and attach using
Bolts(①), Washers(②) and Spring Washers(③) with Allen Key(④).
Please note the Front Leg(B) and Hind Leg(C) is different, there are mark on
the leg.
Do not fully tighten the Bolts.
Repeat the same process to attach the remaining three Legs.
②
③
①
④
Page 4 OF 5