Owner Manual

STEP 4

4. Turn the Cylinder Valve (21 ) on the tank in a clockwise direction to TURN OFF SUPPLY of the LP Gas

supply .

Attach the preassembled Regulator (12/19) from the Fire Table / Column to the Cylinder Valve (21) by

turning the Black Regulator Coupling Nut (20 ) clockwise.

Make sure it is fastened securely and tighten connections - by HAND only.

STEP 5

5. Close the Door (D) back to the Tank Holder

STEP 6

6. Remove the Electronic Ignitor Cap (13) on the electronic Ignitor (13) by unscrewing and slide the Battery

(B) into the batte

ry slot (13).

Make sure the positive side of the Battery( B ) faces outwards.

Screw the Electronic Ignitor Cap (13) over the battery, tightly.