Owner Manual

Part D
Part E.
Load the Gas Tank / Gas Cylinder as indicated by
the bold black arrow.
Place the Tank / Cylinder gently and snugly into the
Metal Stand.
Position the Wing Screw / Nut in place.
Turn the Wing Screw until fully tightens into the Nut.
The Gas Tank / Gas Cylinder is now secured in
place.
User's Guide : Connecting the Fire Table / Column to the Gas
Cylinder.
This next step guides you to connect the Fire Table / Column Regulator to the Gas Cylinder.
Step 1 : Plug the Black Coupling Nut on the
Regulator to the Cylinder Valve.
Step 2 : Turn the Black Coupling Nut, fully
CLOCKWISE until fully locked into the position.
Step 3 : Check for Leaks by : Brush some soap and
water mixture on all connections.
Turn the gas supply on;if extra large bubbles form
on an
y connection there may be a leak. If you smell
gas or a leak is discovered, IMMEDIATELY turn the
gas valve off, disconnect Propane Gas tank.
Do not use the appliance until the leak is repaired
User's Guide : Loading of Gas Tank into the Fire Table /
Column.
The Tank Holder has a Door. Open the Door .
Inside, you will see a Metal Stand with pre-attached
Wing Screw / Nut.
Proceed to Unscrew the Wing Screw / Nut
10