ASSEMBLY INSTRUCTIONS is so coolies Allen Wrench {Included) 2 People Recommended 000: EASY DIFFICULT The Assembly Rating is a 5-point system showing the level of effort needed to assemble a specific product.
CHECK BEFORE STARTING Are you missing anything? Double-check all parts, hardware and accessories listed on Page © are accounted for, Should we send any replacements? Are there any irregularities or flaws in the parts? We can send replacements! Check out our Quick Tips! We recommend reviewing the per-assembly handouts. Even experts need a refresher now and then! Prep Time! Please review the assembly instructions and all diagrams prior to assembling.
PRE ASSEMBLY INTRODUCTION We understand building ready-few-assemble furniture can be a challenging experience for some. To help avoid confusion, we have provided some helpful lips that may speed up the process, oO Teamwork ALWAYS have at least two people to help with transporting and assembling the product to avoid potential injury and/or damage. Suitable Location Assembling near the area of the intended location is highly recommended.
ASSEMBLY AND CARE ADVICE FAILURE TO FOLLOW THE GUIDELINES BELOW MAY RESULT IN INJURY AND/OR PROPERTY DAMAGE. ih x Position each part comely Tum clockwise to Tighten and and insert screws of bolts info only tighten wham step is their respective holes. completed or when instructed to do so. Use the appropriate hand tools or power tools for assembly. Bullet steps, such as tightening screws andiron bolts, may require hand tools to avoid causing damage during assembly.
ASSEMBLY INSTRUCTIONS Align table legs (#4) to the top support then secure by using bolts (#E) with washers 1 Part @xpe Part @Execs Hardware @ exposed Hardware &@ PCs Hardware @ apexes Align top support (#2) to fable top then secure by using bolls (#A) with washers 2 Ts Part @)x1pc Hardware @PCs Hardware @® PCs Hardware éo Apexes # 7/10
ASSEMBLY INSTRUCTIONS 3 Part @x pc Hardware Ax pe Hardware és PCs Hardware @ PCs Hardware Ex pc Align bottom support (#3) io the top support (#2) and table top then secure by using bolts {#A E)} with washers 4 Part Ex pe Hardware @ x1pc Insert dowel (#0) to the bottom support then align table leg {#5) to bottom support 8/10
