Assembly Instructions Caution : You must read this before you proceed Table Part List Label Picture Description QTY A Table Top 1 B Table Legs 2 Description QTY ① Screw (M8*25) 17 ② Spring washer 17 ③ Flat Washer 17 ④ Allen key 1 Hardware Label Picture Page 1 OF 5
Assembly Preparation Before *Before beginning assembly of product, make sure all parts are present. Beginning Compare parts withpackage contents list. If any parts is missing or Assembly: damaged,do not attempt to assemble the product. Assembly Steps OVERVIEW Table Top(A) Table Leg(B) This Table has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Table parts, the above picture is to help you put the various Table parts into perspective.
Step 1 Hardware Used ①：M8 Screw ②：Spring Washer ③：Flat Washer ④：Allen key Position the bottom of the Table top(A) as shown. And then insert the Legs(B) into the mounting position of Table Top(A). Attach the Legs(B) by using M8 Screw(1) + Spring Washer(2)+ Flat Washer (3), onto metal plate of Legs(B), with Allen Key(4). Do not over tighten Screws(1) while assembling the Legs(B) in order to adjust the Legs(B) as needed while assembling and make sure you follow the steps fully. Step 2 Stand the Table up.
Step 3 Make sure all parts are connected and securely locked into position. Your Table is ready for use.
Questions & Answers about Proposition 65 • What is Proposition 65? Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment.
